The thickness of the cold saw blade directly determines the amount of loss of the saw blade during use, that is, the amount of sawdust. Although some people think that the thinner the thickness of the saw blade, the better, and the less sawdust, if the thickness is too low, it will cause a slant. Therefore, the thickness of the saw blade should be selected well. It is best to find the same path and stability. If the saw blade is too thin, it will not be stable enough when running, which will easily reduce the quality of the workpiece. This may affect the production of the enterprise. Therefore, it should be considered from the comprehensiveness. The thickness should be selected from the actual situation. You cannot blindly pursue specifications, otherwise it may be counterproductive.

Acrylic is a special material, usually used to cut explosive edges and cracks. It is very different from the woodworking saw blades used to cut wood. Usually, customers use BA5 tooth shape to cut the tooth shape of acrylic acrylic blades. The teeth are flat on the left and right sides. According to the brittle and hard characteristics of acrylic, cutting non-explosive edges. Generally speaking, the teeth of the woodworking saw blades are relatively thin. The teeth of the woodworking saw blades are left and right teeth. The sharp cutting wood is particle board saw blades usually have 300x3.2x30x72 teeth and 300x3.2x30x96 teeth.